DHCP服务器配置与中继服务器配置

配置路由

1.路由器设置IP
Huaweiintg0/0/0
R1-GigabitEthernet0/0/0ipaddress192.168.1.25424
R1-GigabitEthernet0/0/0intg0/0/1
R1-GigabitEthernet0/0/1ipaddress192.168.2.124

R3intg0/0/1
R3-GigabitEthernet0/0/1ipaddress192.168.2.224
R3-GigabitEthernet0/0/1intg0/0/0
R3-GigabitEthernet0/0/0ipaddress192.168.3.124

R4intg0/0/1
R4-GigabitEthernet0/0/1ipaddress192.168.4.124
R4-GigabitEthernet0/0/1intg0/0/0
R4-GigabitEthernet0/0/0ipaddress192.168.3.2.24

2.配置静态路由（默认路由）
R1iproute-static0.0.0.00.0.0.0192.168.2.2
R4iproute-static0.0.0.00.0.0.0192.168.3.1

3配置DHCP服务器
3.1创建两个IP地址池
R1dhcpenable
R1ippoolppp
R1i-ip-pool-pppnetwork192.168.1.0mask24
R1-ip-pool-pppgateway-list192.168.1.254
R1-ip-pool-pppdns
R1-ip-pool-pppdns-list8.8.8.8R1-ip-pool-pppleaseday1
R1-ip-pool-pppexcluded-ip-address192.168.1.10192.168.1.20
R1-ip-pool-pppq

R1ippoolooo
R1i-ip-pool-ooonetwork192.168.4.0mask24
R1-ip-pool-ooogateway-list192.168.2.1
R1-ip-pool-ooodns
R1-ip-pool-ooodns-list8.8.8.8
R1i-ip-pool-oooleaseday1

3.2端口启动dhcp为全局连接
R1intg0/0/1
R1-GigabitEthernet0/0/1dhcpselectglobal
R1intg0/0/0
R1-GigabitEthernet0/0/0dhcpselectglobal

配置中继代理
relaydhcpenable
relayintg0/0/1
relay-GigabitEthernet0/0/1dhcpselectrelay
relay-GigabitEthernet0/0/1dhcprelayserver-ip192.168.2.1
结果验证

Tags：配置路由，DHCP服务器配置与中继服务器配置

版权声明：本站文章来源标注为YINGSOO的内容版权均为本站所有，欢迎引用、转载，请保持原文完整并注明来源及原文链接。禁止复制或仿造本网站，禁止在非www.yingsoo.com所属的服务器上建立镜像，否则将依法追究法律责任。本站部分内容来源于网友推荐、互联网收集整理而来，仅供学习参考，不代表本站立场，如有内容涉嫌侵权，请联系alex-e#qq.com处理。